Sprung Core-SPW

Home|Ejection|Sprung Core-SPW

Sprung Core-SPW

Minimum space required for installation, only needs the space of an ejector.
No need for complex mechanical systems.

Category:

Description

Product features:
This type of sprung core can replace the PW060622, PW060822, PW080825, PW081025, PW081225, PW101430, PW101630, PW101830 of CUMSA
1. Simple structure, small installation space, only the size of a ejector pin;
2. Convenient installation, simplified processing procedures, thus saving costs;
3. It can be used alone or in combination;
4. All models of this sprung core are equipped with pads and mounting screws;
5. Copper sleeve can be provided as required.
Installation instructions:
· In order to ensure the smooth stripping, it is suggested to make the corresponding drawing Angle for the barb position;
· Sprung core bevel (the back of the rubber position) is fully fitted to the core (the fitting length C value is guaranteed);
·If the slingshot thimble is too long during installation, it can be cut off from the tail;(the depth of locking thread will also become shallow after cutting, if the length of the cut is too long, it needs to be customized).
· Sprung core bevel (the back of the rubber position) is fully fitted to the core (the fitting length C value is guaranteed);