Round Locating Units-TPNF

Home|Locating|Round Locating Units-TPNF

Round Locating Units-TPNF

The round locating units  widely used in a variety of molds. This Straight positioning pin Unlike TPN, TPNF pins are straight and TPN pins are tapered. In addition, TPNF pins are available in several sizes for the same diameter.

 

Category:

Description

Product overview:Product overview:
Due to the gap between the guide column and the guide sleeve, a taper lock set (Positioning Straight Pin set) is needed to ensure accurate die closing.
If the corresponding positions of cavity (fixed die insert) and core (moving die insert) are not completely matched, the core insert and side core-pulling slider and other parts will collide and cause damage or abnormal wear, and sometimes lead to size difference and burr of formed products.
Round locating units can be used to locate the cavity (fixed die insert) and core (moving die insert) to prevent them from being misplaced.
· This product is A precise positioning pin component without taper, which processes the A° Angle of the taper lock set to 0°, and is used for connectors. The electronic component mold USES A large number of small and precise cores with narrow spacing, so precise positioning is needed to avoid the collision between cores.
· This type of Round locating units are ultra-precision fine locating pins with taper counterpins and outer diameter less than 0.003mm per piece of coaxiality
● precautions for use
1. When using, please keep the end face clearance of about 1mm to prevent the collision between the end face of pin and sleeve and cause damage
2. As the gap between pin and sleeve is very narrow, it is suggested to use precision guide pin

Unlike TPN, TPNF pins are straight and TPN pins are tapered. In addition, TPNF pins are available in several sizes for the same diameter.