Taper Positioning Block -TBSF

  • This positioning piece is MISUMI’s standard size of TBSF.
  • More precise

This side lock is TSSB, VTSSB, TSSBM (with oil tank) and VTSSBM (with oil tank) of MISUMI.
It is suitable for precise mold positioning of connectors and electronic components.
· before the core is embedded into the mold cavity, it is positioned to prevent the core from being worn and damaged.
· the template can process the positioning slot at the same time to ensure its accurate positioning.
· as the clearance is very narrow, it is recommended to use precision guide column.
● precautions for use
1. When using, please keep the end face clearance of about 1mm to prevent the collision between the end face of pin and sleeve and cause damage.
2. When the mold size is large, to ensure precise positioning, it is recommended to use 2 sets of side positioning block components on each side of the length direction.
3. There are two oil slots on each side of the sliding part and the pin of the TSSBM side positioning block component
4. TSSBM keeps the sliding part lubricated through the oil groove to prevent the side positioning block component from sticking and sintering

 

Taper Positioning Block

 

 

taper positioning block

Scroll to Top

Get a Quick Quote!

x

    Get a Quick Quote!

    x