Latch Lock-Z5

Product features:

  • Shrapnel design, safe and reliable, accurate formation calculation
  • Large clamping force, suitable for large mold
  • External installation, easy to maintain
  • Installation instructions
  • Install the cushion block, and install the cushion block parallel to the parting surface on the template with cup head screw;
  • Install the tie rod fixing seat, and fix the tie rod fixing seat perpendicular to the parting surface with the cup head screw.Attention should be paid to eliminate the gap between the barb and the cushion block.
  • Install the main body and fix the main body on the template perpendicular to the parting surface;
  • Fixed block of installation stroke; components to be locked have been symmetrically installed on the mold; pin holes should be made after correct installation and normal operation;
  • The mold lock is a precision device, please position and install it symmetrically.And ensure the open mold stroke is consistent, such as the trip is inconsistent or asymmetrical installation, will lead to a single set of clamping clamping force, because the force imbalance will lead to the clamping module fracture;
  • Select the corresponding model according to the size of the mold. It is recommended to use 2 sets or 4 sets of clamping buttons for each mold;
  • Note that the main body of z5-0 is a fixed pin hole and the cushion block is an installation screw hole
  • Carry out coordination function test to check whether each part of the mold lock runs smoothly and whether the travel is consistent;
  • If the mold needs to be repaired, please remove the inner mold lock before the subsequent operation.

Z5-0

Z5-1

Z5-2

 

 

nylon parting lock

parting lock

Scroll to Top
Scroll to Top

Get a Quick Quote!

x

    Get a Quick Quote!

    x