Latch Lock-Z170
- Similar to HASCO’s Z170 1. mechanical interlocking design， safe and reliable.
- Insert bar， end of pull rod adopt high frequency annealing treatment， so that easy to second time processing installed holes.
- This latch parts not only control opening mold sequence， But also control closed sequence.
- Product Details
- Factory
- Application
- Please install the housing in parallel to the parting line first.
- Before install the control bar， please cut it to the necessary length， form the bolt hole. Please tighten the screw when mold closed.(Please note：Make sure in a fully position mold before fix the control bar， and eliminate the clearance between the control bar and locking roller)
- Please cut the latch bar to the necessary length， and installation in parallel to the parting line.
- Please install the latch lock symmetrically， otherwise， it would be fractured with the unbalanced force due to only one side of lockset be forced.
- This latch lock is the precise standardized item， please do not apply together with other own customer machined parts.
- If mold need to maintain， please remove the latch locks first.
- After installed， carryout a functional test， check whether the individual parts of the latch lock units moves smoothly， the stroke is applicable.Recommend testing on matched Molds machine or Injection machine，no Lifting Machine.
