Mold Date stamp of MISUMI
- It has accurate arrow indication, and uses ball positioning;
- From the subtype surface of mould, you can quickly replace the inserted parts without dismantling mould.
- The inserted parts can change its year, suitable for
- Specification
- Factory
- Application
- Similar to MISUMI’s DTBX、DTDX、DTX、DTEX、DTXS、DTFX、DTGX、DTNX It has ball structure with fit tightness;
- It has accurate arrow indication, and uses ball positioning;
- From the subtype surface of mould, you can quickly replace the inserted parts without dismantling mould.
- The inserted parts can change its year, suitable for
- long-tem production mould, so as to save cost of the mould.
From D4 to D20
A03: PL exchange type mold date inserts
No need to disassemble the template, The inside arrow can be Replaced from the PL side (internal side of the die) without removing the plate. It is convenient for repair and maintenance.
Use a screwdriver to rotate the arrow in the middle of the old date inserts, and you can quickly change the arrow positioning of the month indication inner insert from the parting surface. The steel ball indexing and indexing structure is adopted, which improves the accuracy compared with the O-ring structure. The gas and high temperature generated during the injection molding process have good durability.
This mold date inserts is similar to MISUMI’s DTBX, DTDX, DTGX, DTXS and other mold date inserts.
Also similar to DME’s UYM, UOM, UOY, UOD, UOS, UOB and other mold date inserts.